Z-Wave Basics for Animus Heart

Owned by animus
Last updated: Jun 03, 2018

      


Z-Wave is a wireless communications protocol used primarily for home automation. Read more about the technology here. 

Animus Heart is a Z-Wave Plus device with support for S2 security. Animus Heart can be operated in any Z-Wave network with other Z-Wave certified devices from other manufacturers. All non-battery operated nodes within the network will act as repeaters regardless of vendor to increase reliability of the network.


Z-Wave Terminology

Z-Wave functionality

Documentation terminologyExample
InclusionAddThe process of adding a node to the Z-Wave network.
ExclusionRemoveThe process of removing a node from the Z-Wave network.
ReplicationCopyThe process of copying network information from one controller to another.
ParametersConfiguration settingsParameters are configuration settings for a Z-Wave device.  


Device security, S0 or S2? 

The latest Z-Wave devices are implemented with a new security level, called S2, which Animus Heart supports.  

Animus Home has its own icon for S2. This icon appears on places where it is important to explain that the device is a S2 security device.
  


First steps and needs

Working with Z-wave devices is easy when you have the Animus Heart Gateway. The majority of devices should work out of the box. Nevertheless, sometimes configuring the parameters of a device might be needed to gain extra functionality, or if you wish to optimise the use of that device. For this, some Z-Wave devices allow you to manually set configuration variables to do things like adjust ramp rate, delays, etc. This is unique for each device, and each manufacturer handles this differently. Read more on how to do this on article; Changing Z-Wave Parameters. 


Any possible configuration parameters are provided by the device creator, always make sure you read the manual of the device you want to use.




References
Z-wave Alliance 




Copyright © Animus Home