You can enter recovery mode to make a factory reset or to update the firmware of your Animus Heart.
Step-by-step guide
Read all the steps first before attempting anything!
- Unplug the power to your Animus Heart.
- Plug the power back in, wait for 5 seconds, then unplug the power again. This enables recovery mode for the next time your Heart boots up.
- Plug the power back in and wait until the Halo (LED indicator) shows orange. If the default blue light is shown after a minute your Heart is not in recovery mode, please redo step 2.
- Open a web browser and enter the IP of your Heart (if you don't know the IP, visit the Find IP page).
- If you have succeeded then you should have a view like this:
<Image showing successful connection to the Heart and the Animus Heart portal> - To get out of recovery mode simply reboot your Heart.
Related articles