...
Add/Remove Z-Wave devices through the terminal
...
Type
Code Block | ||
---|---|---|
| ||
enter zwave |
...
terminal
To be able to add/remove Z-Wave devices through the terminal enter command group zwave in the Web Terminal.
Add
...
To start the process of adding a Z-Wave product, type
in the console to start the inclusion/exclusion process.Code Block language java learn start
add start
- Set the device you want to add in pairing mode. Usually you have to press a button on the device three (3) times quickly. To be sure on how you add that particular device, please read the manual of the device for more details.
- When the inclusion/exclusion is succeeded/failed, it will print the status logs in the console.
Add/Remove Z-Wave devices with S2 security
- Enter the Web Terminal in the Animus Heart GUI.
Type
. - If further steps are needed (e.g. accepting Security keys and input of DSK) this will be prompted in the console.
- After the device is successfully included an interview of the device is started after which it shows up in the framework.
Remove
To start the process of removing a Z-Wave product, type
Code Block language java enterremove zwavestart
- When the exclusion is done, or if is fails, this is printed in the console.Set the including controller in inclusion/exclusion mode. Refer to the manual of the including device for details on how to set it in inclusion/exclusion mode.
Type
Replace failed
The process of replacing a failed Z-Wave product with another (non-included) device is the same as adding a new Z-Wave device (through the console), except that the first step is:
Code Block | ||
---|---|---|
|
...
add start |
...
<failed node to be replaced> |
Remove failed
The process of removing a failed Z-Wave product is the same as removing a Z-Wave device (through the console), except that the first step is:
Code Block | ||
---|---|---|
| ||
remove start <failed node to be removed> |