...
- Unplug the power to your Animus Heart.
- Plug the power back in, wait for the Halo (LED indicator) to change from Light Blue(default) to Dark Blue and then back to Light Blue (approximately 8 seconds), then unplug the power again during this stage. (This enables recovery mode for the next time your Heart boots up)
- Plug the power back in and wait until the Halo shows Orange. If the default blue light is shown after a minute your Heart is not in recovery mode, please redo the steps 1-2.
- Open a web browser and enter the IP of your Heart (if you don't know the IP, visit the Find IP page).
NOTE: Animus Heart needs to be connected to the network through the Ethernet cable. - If you have succeeded then you should have a view like this:
- To get out of recovery mode simply reboot your Heart, either by clicking the reboot button on the GUI or unplugging and plugging back in your Animus Heart.
...